баннер
Дом

Guardrail post installation rig

Последний блог
ТЕГИ

Guardrail post installation rig

  • How Deep Can a Down-the-Hole Drill Rig Drill? 30 m, 35 m and 50 m Models Compared
    Nov 17, 2026
    Anhui TeZhong Machinery Technology Co., Ltd. builds six down-the-hole drill rigs rated for 30 m, 35 m and 50 m drilling depth and 90–500 mm hole diameter, with power from 70 kW to 228 kW and air demand from 10 to 50 m³/min. Those are catalog ratings for six named configurations, not a guaranteed depth in your rock: the 50 m figure belongs to the TZ729 crawler, the widest 260–500 mm range to the TZ750, and the only self-contained 228 kW unit to the TZ849, which carries its own 25 m³/min, 13 bar compressor. Our open-pit down-the-hole drilling unit range covers both separated machines drawing air from an external compressor and integrated ones making their own. Match depth, diameter, hammer and air together before asking for a quote. As a direct manufacturer and OEM supplier, we would rather you find the limits here than on the bench. Figures current as of 17 November 2026. Quick Answer: depth, diameter and the model behind each number Maximum drilling depth is 50 m on the TZ729 crawler, 35 m on the TZ712, and 30 m on the TZ612, TZ720, TZ750 and TZ849. Hole diameter runs from 90–120 mm on the TZ612 to 260–500 mm on the TZ750; rated power spans 70–228 kW and air consumption 10–50 m³/min. These are catalog ratings, not field results — achievable depth depends on rock hardness, hole diameter, drill pipe length and the air volume actually delivered at the hammer. As of 17 November 2026, four of the six models share the same 30 m rating at hole diameters from 90 mm to 500 mm, so depth alone is not a specification. Figure 1: Depth and hole diameter are separate limits. The deepest rig is not the one that drills the widest hole. 50 m Deepest rating, TZ729 crawler 90–500 mm Hole diameter across six models 10–50 m³/min Air consumption range 70–228 kW Rated power range Table of Contents What drilling depth does each of the six models reach? Which hole diameter and hammer size go together? How much air does each rig need? What does a separated rig need that an integrated one carries? Which specifications decide whether the rig can work on your site? How do you match a rig to mining, foundation or road work? Which numbers should you double-check on the specification sheet? What should you send before we quote a rock drilling configuration? FAQ What drilling depth does each of the six models reach? Four of the six rigs are rated to 30 m, one to 35 m and one to 50 m. That last figure belongs to the TZ729 crawler, with a 4"/5"/6" hammer and φ76 rods in 2,000 or 3,000 mm lengths — fifty metres of assembled string, not one 50 m rod. The TZ729 reaches deepest but only 115–180 mm; the TZ750 goes widest at 260–500 mm but stops at 30 m. No single machine in the range maximises both. Model Drilling depth Hole diameter Hammer Air consumption Rated power TZ612 separated 30 m 90–120 mm 3"/4" 10–15 m³/min 78 kW TZ712 surface 35 m 90–140 mm 3"/4" 10–18 m³/min 70 kW TZ729 crawler 50 m 115–180 mm 4"/5"/6" 11–21 m³/min 78/55 kW TZ720 open-pit 30 m 160–300 mm 4"–8" 14–35 m³/min 73.5 kW TZ750 separated 30 m 260–500 mm 6"–12" 14–50 m³/min 88 kW TZ849 integrated 30 m 152–200 mm — 25 m³/min on board 228 kW Which hole diameter and hammer size go together? Hole diameter follows the hammer. A 3"/4" hammer covers 90–140 mm; 4"–8" covers 160–300 mm; 6"–12" covers 260–500 mm. Bigger hammers need more torque and more air, which is why the 6,820 kg TZ750 carries 13,000 N.m of maximum rotary torque while the 4,404 kg TZ612 carries 1,650 N.m. Dividing those two catalog figures gives about 7.9× — that is arithmetic on the ratings, not a measured performance ratio. Drill strings are not interchangeable either: φ60, φ64, φ76 and φ89/102 are four different sizes. Tell us what is already on your rack before we recommend a configuration. How much air does each rig need? Compressed air drives the hammer and clears the cuttings at the same time. The hammer sits at the bottom of the string, striking and rotating together — a method used mainly for hard to very hard rock and for breaking through large boulders. Working pressure runs 0.7–1.8 MPa on the two smallest rigs and 1.0–2.4 MPa on the TZ720 and TZ750; the TZ849 supplies 13 bar from its own two-stage compressor. Fuel tanks are 70 L, 100 L and 400 L — capacities, not shift consumption. We do not publish a per-model burn rate and will not invent one. Under-size the compressor and the hammer still turns, just slower, with more fines left in the hole. What does a separated rig need that an integrated one carries? Five of the six are separated machines: the drill travels on its own crawler and takes air from an external compressor. The TZ849 is integrated — one chassis, one 228 kW Yuchai National III engine, a 400 L tank, a 14-core dust collector, IP56 electrics and 8,800 × 2,300 × 2,600 mm dimensions. At the other end the TZ612 weighs 4,404 kg and takes 10–15 m³/min from a separate unit. A separated rig is not automatically cheaper; it is the flexible one. If a quarry already runs a compressor, a second drill costs less than a second on-board compressor. If the crew moves benches every shift, the integrated unit saves the hose, the second engine and one more machine on the low loader. We supply diesel screw compressors as a separate product line, sized against air consumption rather than engine kW. Which specifications decide whether the rig can work on your site? Bare metal weight runs 4,404–6,820 kg across the separated rigs, walking speed 0–2 or 0–3 km/h, maximum gradeability 25° on the TZ612 and 35° on most others, ground clearance 254–450 mm. A 35° rating is a chassis limit, not permission to work a 35° bench without a plan. Feed force is the other one: 15 kN feeding and 25 kN lifting on the smaller rigs, 25 kN and 35 kN on the TZ720 and TZ750, 35 kN maximum pulling force on the TZ849. Feed stroke runs 2,640 mm on the TZ612 to 4,000 mm on the TZ750, with 900 mm of compensation listed across the range. Those figures matter more than the headline depth when the hole is inclined or the rock is broken. How do you match a rig to mining, foundation or road work? These open-pit machines are built for mining, building foundation construction and road construction. The geology is the same — hard to very hard rock, or large boulders. What changes is the hole. Job Hole demand Configuration to start from Quarry / open-pit blast holes 115–180 mm, deep strings TZ729, 50 m, 4"/5"/6" hammer Large-diameter rock sockets 260–500 mm TZ750, 30 m, 6"–12" hammer Foundation pre-drilling 90–140 mm TZ612 or TZ712 Road and barrier lines over rock 90–200 mm, many set-ups TZ712 or TZ849 For PV foundations that cross a rock band, pre-drilling is usually followed by driving on the same alignment, which is where a utility-scale PV ramming unit comes in after the holes are opened. Road projects hit the same problem when posts meet bedrock; a guardrail post installation rig follows the pre-drilled line. Neither job changes the drilling rating — it changes how many holes you need and how often the rig moves. Which numbers should you double-check on the specification sheet? We would rather point at these than have you find them at commissioning. Model names first: the TZ712 appears as both a Surface rig and a Separated rig, and the TZ750 and TZ849 listings have their URLs crossed with each other's titles. Ask for the model stamped on the machine, not the label on a link. Then units. On the TZ612 and TZ712 tables the walking-speed row carries Nm / 5000 and the drilling-angle row carries km/h / 0–2 — the unit column has slipped. The TZ849 gives weight as 11 with no unit, hardness as "f=6 20" and torque as "JinKe593/8500" rather than a single N.m value. We have not guessed what those should be. Put the agreed depth, diameter, hammer, rod and air figures on the signed configuration sheet; that is the document the machine gets built against. What should you send before we quote a rock drilling configuration? Six items, in the order our engineers ask for them: hole diameter, depth and rock hardness; the drill pipe and bit stock already on site; the air supply available; site access, slope and bench width; the engine and emission standard; and job type with shift length. As a factory and OEM supplier we can change engines, hammer heads and mast arrangements, but only after the hole itself is defined. Send those and we will answer with a model, its full specification table and a written configuration sheet. We will not promise a metres-per-hour rate for rock we have not seen. CE and ISO9001 certification, a yard test run and video outgoing-inspection are what we can put in front of you before shipment. Anhui TeZhong Machinery Technology Co., Ltd. has built piling and drilling equipment in Suzhou, Anhui since 2010, with 3 invention patents, 38 utility model patents and 1 PCT filing — the certificates are what we ask you to check. FAQ What is the deepest hole these rigs can drill? 50 m, on the TZ729 crawler: 115–180 mm, a 4"/5"/6" hammer and φ76 rods in 2,000 or 3,000 mm lengths. The other five are rated to 30 m or 35 m. Depth means assembled drill string, not one rod; what you actually reach depends on rock hardness, diameter and the air volume at the hammer. Ratings current as of 17 November 2026. Can one rig drill a 260–500 mm hole? Yes — the TZ750: 6"–12" hammer, φ89/102 × 3,000 mm rods, 13,000 N.m maximum rotary torque, 14–50 m³/min at 1.0–2.4 MPa, 88 kW and 6,820 kg bare metal weight. It is rated to 30 m. Match it with an external compressor sized to the top of that air range. Do I need to buy a separate air compressor? For five of the six rigs, yes — 10–50 m³/min depending on model. The TZ849 carries its own two-stage compressor delivering 25 m³/min at 13 bar, driven by a 228 kW Yuchai National III engine. Size any external unit against air consumption and working pressure, and confirm the pair on the signed configuration sheet.
    ГОРЯЧИЕ ТЕГИ : Guardrail post installation rig
    ЧИТАТЬ ДАЛЕЕ

оставить сообщение

оставить сообщение
Если вы заинтересованы в нашей продукции и хотите узнать более подробную информацию, пожалуйста, оставьте сообщение здесь, мы ответим вам, как только сможем.
представлять на рассмотрение

Our hours

Будь то праздник или фестиваль, у нас будет кто-то, кто примет вас 24 часа в сутки и ответит вам в кратчайшие сроки.

Contact Us: jennifer@tzpilemachine.com

Дом

Продукты

WhatsApp

СВЯЗАТЬСЯ С НАМИ

Need Help? Chat with us

Start a Conversation

Hi! Click one of our members below to chat on